Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1112054.png)
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO DISTANCE CONTROL ECU (CANH, CANL)
OK -- REPLACE DISTANCE CONTROL ECU See: Cruise Control/Cruise Control Module/Service and Repair/Removal
31. CHECK FOR SHORT TO B+ IN CAN BUS WIRE (MAIN BODY ECU)
(a) Disconnect the H2 main body ECU connector.