Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Disconnect the H66 bus buffer ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
NG -- REPAIR OR REPLACE BUS BUFFER ECU BRANCH WIRE OR CONNECTOR (CAN+, CAN-)
OK -- REPLACE BUS BUFFER ECU
Center Airbag Sensor Communication Stop Mode
NETWORKING: CAN COMMUNICATION SYSTEM: Center Airbag Sensor Communication Stop Mode
- Center Airbag Sensor Communication Stop Mode
DESCRIPTION
WIRING DIAGRAM