Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Manifold Pressure/Vacuum Sensor: Service and Repair
Installation
1UR-FE ENGINE CONTROL: MANIFOLD ABSOLUTE PRESSURE SENSOR: INSTALLATION
1. INSTALL MANIFOLD ABSOLUTE PRESSURE SENSOR
(a) Install a new O-ring to the manifold absolute pressure sensor.
(b) Install the manifold absolute pressure sensor with the screw.
Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)
(c) Connect the manifold absolute pressure sensor connector.
2. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and
Replacement/Engine Assembly/Installation