Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(1) Disconnect the clamp and No. 3 air injection system hose.
(2) Using a clip remover, remove the clamp from the body panel.
(b) Front Fender RH Inside:
(1) Disconnect the No. 3 air injection system hose from the air pump.
(2) Using a clip remover, remove the clamp from the body panel.
5. REMOVE AIR PUMP ASSEMBLY WITH BRACKET
(a) Disconnect the 2 air pump connectors and detach the 3 wire harness claws.
(b) Remove the 2 bolts, 2 nuts and air pump.
6. REMOVE AIR PUMP INLET
(a) Remove the 2 bolts, slide the 2 clips off of the No. 1 air injection system hoses, disconnect the hoses and remove the air pump inlet.
7. DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE
(a) Disconnect the 2 No. 1 air injection system hoses.
8. REMOVE AIR PUMP ASSEMBLY
(a) Using a clip remover, detach the 2 clamps and remove the air pump from the bracket.