Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Connect the connector.
(c) Connect the charcoal canister outlet hose.
7. CONNECT NO. 1 CHARCOAL CANISTER OUTLET HOSE
(a) Connect the No. 1 charcoal canister outlet hose.
8. CONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY
(a) Install the bolt.
Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)
(b) Connect the vent line hose.
HINT
*
Before installing the hose, make sure that it is not damaged. Make sure that there is no foreign matter present on the connecting
surfaces.
*
After connecting, check if the hose and the connector are securely connected by pulling on them.