Sequoia 4WD V8-4.6L (1UR-FE) (2010)
EGR Valve: Service and Repair
Installation
1UR-FE EMISSION CONTROL: EGR VALVE: INSTALLATION
1. INSTALL EGR VALVE BRACKET
(a) Install the EGR valve bracket with the 3 bolts.
Torque : 21 Nm (214 kgf-cm, 15 ft-lbf)
2. INSTALL NO. 3 EGR PIPE SUB-ASSEMBLY
(a) Install a new gasket and the No. 3 EGR pipe with the 2 nuts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
3. INSTALL EGR INLET
(a) Install a new gasket and the EGR inlet with the 2 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
NOTICE:
Make sure the gasket's claws are not caught between the EGR inlet and EGR valve.
4. INSTALL EGR VALVE ASSEMBLY
(a) Install a new gasket to the intake manifold.
(b) Install a new gasket to the No. 2 EGR pipe.