Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Entertainment System Control Module: Service and Repair
Removal
AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY
(a) Remove the instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal.
3. REMOVE MULTI-MEDIA INTERFACE ECU
(a) Remove the nut.
(b) Disconnect the connector and remove the multimedia interface ECU.
4. REMOVE MULTI-DISPLAY CONTROLLER BRACKET A
(a) Remove the 2 bolts and multi-display controller bracket A.