Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Control Module HVAC: Service and Repair
Air Conditioning Amplifier
Components
HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: COMPONENTS
Removal
HEATING / AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. REMOVE FRONT DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
3. REMOVE COWL SIDE TRIM BOARD RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
4. REMOVE INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
6. REMOVE LOWER INSTRUMENT PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
7. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIR BAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Knee Airbag Assembly (w/ Passenger Side Knee Airbag)/Removal
8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH See: Body and Frame/Interior Moulding /