toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Knee Airbag Assembly (for Driver Side)|Page 7672 > < Knee Airbag Assembly (for Driver Side)|Page 7670
Page 10
background image

2. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the procedures up to "Remove Roof Headlining Assembly"  
  See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Removal.

3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY

(a) Disconnect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 14 bolts.

(c) Disengage the 11 claws and the 2 clamps and remove the curtain shield airbag.

Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY

(a) Engage the 11 claws and 2 clamps and install the curtain shield airbag.

Knee Airbag Assembly (for Driver Side)|Page 7672 > < Knee Airbag Assembly (for Driver Side)|Page 7670