Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-2399016.png)
NOTICE:
To avoid damaging SST connector and wire harness, do not lock the secondary lock of the twin lock. Also, secure some slack for SST
wire harness inside the tire.
(h) Deploy the airbag.
(1) Connect the red clip of SST to the battery positive (+) terminal and the black clip of SST to the battery negative (-) terminal.
(2) Check that no one is within a 10 m (32.8 ft.) radius of the tire which the curtain shield airbag is tied to.
(3) Press SST activation switch and deploy the airbag.
CAUTION:
When deploying the airbag, make sure that no one is near the tire.
HINT
The airbag is deployed as the LED of SST activation switch comes on.
(i) Dispose of the curtain shield airbag.
CAUTION:
*
The curtain shield airbag becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after
deployment.
*
Use gloves and safety glasses when handling a curtain shield airbag with a deployed airbag.
*
Do not apply water to a curtain shield airbag with a deployed airbag.
*
Always wash your hands with water after completing the operation.
(1) Remove the curtain shield airbag from the tire.
(2) Place the curtain shield airbag in a plastic bag, tie it tightly and dispose of it in the same way as other general parts.
Components
SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT PASSENGER AIRBAG ASSEMBLY: COMPONENTS