toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Knee Airbag Assembly (for Driver Side)|Page 7705 > < Knee Airbag Assembly (for Driver Side)|Page 7703
Page 43
background image

(1) Covering method using a cardboard box:

Cover the steering pad with the cardboard box and place the weights on the cardboard box in 4 places with at least 190 N (19 kgf, 41.9
lbf).

NOTICE:
*

When the dimension Y of the cardboard box exceeds the diameter of the disc wheel with tire which the steering pad is tied to, X
should be the following size. X = 460 mm (18.1 in.) + width of tire.

*

If a cardboard box which is smaller than the specified size is used, the cardboard box will be broken by the shock from the airbag
deployment.

(2) Covering method using tires:

Place at least 3 tires without disc wheels on the tire with disc wheel which the steering pad is tied to. Place the tire with disc wheel on them.

CAUTION:
Do not use tires with disc wheels except on the top and bottom.

NOTICE:
*

As the tires may be damaged by the airbag deployment, use a tire that you are planning to throw away.

*

Do not place SST connector under the tire because it could be damaged.

(3) Tie the tires together with 2 wire harnesses.

Knee Airbag Assembly (for Driver Side)|Page 7705 > < Knee Airbag Assembly (for Driver Side)|Page 7703