Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Air Bag Deactivation Switch: Service and Repair
Removal
SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
2. SEPARATE NO. 1 SWITCH HOLE BASE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Switch/Service and
Repair/Power Back Door Main Switch/Removal
3. REMOVE CURTAIN AIRBAG CUTOFF SWITCH
(a) Disconnect the connector.
(b) Disengage the 2 claws and remove the switch.