Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-235004.png)
4. INSTALL FOLD SEAT SWITCH ASSEMBLY (for RH Side)
(a) Attach the 2 claws to install the fold seat switch assembly.
5. INSTALL REAR POWER SEAT SWITCH (for RH Side)
(a) Attach the 2 claws to install the rear power seat switch.
6. INSTALL QUARTER TRIM COVER RH (for RH Side)
(a) Connect the connector.
(b) Attach the 2 claws and 2 guides to install the quarter trim cover RH.
7. INSTALL FOLD SEAT SWITCH ASSEMBLY (for LH Side)
HINT
Use the same procedure for the RH side and LH side.
8. INSTALL REAR POWER SEAT SWITCH (for LH Side)
HINT
Use the same procedure for the RH side and LH side.
9. INSTALL QUARTER TRIM COVER LH (for LH Side)
HINT