Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-241001.png)
Power Trunk / Liftgate Hazard Sensor: Service and Repair
Power Back Door Touch Sensor (for LH Side)
Components
DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR (for LH Side): COMPONENTS
Removal
DOOR / HATCH: POWER BACK DOOR TOUCH SENSOR (for LH Side): REMOVAL
1. REMOVE POWER BACK DOOR ROD See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
2. REMOVE BACK DOOR CENTER GARNISH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
3. REMOVE BACK DOOR SIDE GARNISH RH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
4. REMOVE BACK DOOR SIDE GARNISH LH See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
5. REMOVE BACK DOOR STRAP COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
6. REMOVE BACK DOOR PULL STRAP See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
7. REMOVE BACK DOOR TRIM BOARD ASSEMBLY See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
8. REMOVE BACK DOOR SERVICE HOLE COVER See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Service and
Repair/Disassembly
9. REMOVE POWER BACK DOOR SENSOR LH
(a) Disconnect the connector.