Sequoia 4WD V8-4.6L (1UR-FE) (2010)
2. REMOVE SEAT HEATER SWITCH
(a) Disengage the 4 claws and remove the 2 seat heater switch.
Installation
SEAT: SEAT HEATER SWITCH (for Rear No. 1 Seat): INSTALLATION
1. INSTALL SEAT HEATER SWITCH
(a) Engage the 4 claws to install the 2 seat heater switch.
2. INSTALL REAR CONSOLE UPPER PANEL See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and
Replacement/Rear Console Box/Installation