Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-391001.png)
Fuel Gauge Sender: Service and Repair
Removal
1UR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL
1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY
(a) Remove the fuel suction with pump and gauge tube See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair/Removal and Replacement/Removal.
2. REMOVE FUEL SENDER GAUGE ASSEMBLY
(a) Disconnect the fuel sender gauge connector.
(b) Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.