Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Dome Lamp Switch: Service and Repair
Room Light Switch
Components
LIGHTING (INT): ROOM LIGHT SWITCH: COMPONENTS
Removal
LIGHTING (INT): ROOM LIGHT SWITCH: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
2. REMOVE COWL SIDE TRIM BOARD LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal.
3. REMOVE INSTRUMENT SIDE PANEL LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Removal.
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Dashboard
/ Instrument Panel/Service and Repair/Removal
5. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
6. REMOVE INTERIOR DOME LIGHT SWITCH ASSEMBLY
(a) Disengage the 2 claws and remove the interior dome light switch.