Sequoia 4WD V8-4.6L (1UR-FE) (2010)
HINT
Use the same procedure as for the RH side See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Disassembly.
2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Remove the 3 screws and the power window regulator master switch.
Installation
WINDOW / GLASS: POWER WINDOW MASTER SWITCH: INSTALLATION
1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
(a) Install the power window regulator master switch with the 3 screws.
2. INSTALL FRONT ARMREST BASE UPPER PANEL LH
HINT
Use the same procedure as for the RH side See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Reassembly.