Toyota Workshop Service and Repair Manuals > Sequoia 4WD V8-4.6L (1UR-FE) (2010) > Starting and Charging | Power and Ground Distribution | Auxiliary Power Outlet | Component Information | Service and Repair | Center Power Outlet Socket (w/ Rear Seat Entertainment System)

Page 2

2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal

and Replacement/Front Console Box/Removal

3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and

Repair/Removal and Replacement/Front Console Box/Removal

4. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument

Panel/Service and Repair/Removal

5. REMOVE POWER OUTLET SOCKET ASSEMBLY

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the power outlet socket assembly.

6. REMOVE POWER OUTLET SOCKET COVER

(a) Disengage the 2 claws and remove the power outlet socket cover.

Installation

POWER OUTLETS (INT): POWER OUTLET SOCKET: INSTALLATION

1. INSTALL POWER OUTLET SOCKET COVER

(a) Engage the 2 claws and install the power outlet socket cover.

2. INSTALL POWER OUTLET SOCKET ASSEMBLY

(a) Engage the claw and install the power outlet socket assembly.

Toyota Workshop Service and Repair Manuals