Sequoia 4WD V8-4.6L (1UR-FE) (2010)
2. INSTALL POWER OUTLET SOCKET ASSEMBLY
(a) Engage the claw and install the power outlet socket assembly.
3. INSTALL CONSOLE BOX BEZEL
(a) Connect the connector.
(b) Engage the claw and install the console box bezel.
4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal
and Replacement/Front Console Box/Installation
Components
POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: COMPONENTS