Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-1868011.png)
6. REMOVE DECK BOARD BRACKET See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
7. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 2 Seat
Assembly (for Manual Seat Type RH Side)/Removal.
8. REMOVE REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
(a) Remove the rear No. 2 seat assembly RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 2 Seat
Assembly (for Power Seat Type RH Side)/Removal.
9. REMOVE REAR SEAT CUSHION HINGE LOWER COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
10. REMOVE REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
14. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
15. REMOVE REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
16. REMOVE QUARTER TRIM PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
17. REMOVE QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
18. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claws and remove the power outlet socket assembly.
19. REMOVE POWER OUTLET SOCKET COVER
(a) Disengage the 2 claws and remove the power outlet socket cover.
Installation
POWER OUTLETS (INT): REAR POWER OUTLET SOCKET: INSTALLATION