Sequoia 4WD V8-4.6L (1UR-FE) (2010)
POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET (w/o Rear Seat Entertainment System): REMOVAL
1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY See: Heating and Air Conditioning/Control Assembly/Service and Repair/Rear
Air Conditioning Panel/Removal
2. REMOVE POWER OUTLET SOCKET ASSEMBLY
(a) Using a screwdriver with its tip wrapped in protective tape, engage the claw and remove the power outlet socket assembly.
3. REMOVE POWER OUTLET SOCKET COVER
(a) Engage the 2 claws and remove the power outlet socket cover.
Installation
POWER OUTLETS (INT): CENTER POWER OUTLET SOCKET (w/o Rear Seat Entertainment System): INSTALLATION
1. INSTALL POWER OUTLET SOCKET COVER
(a) Engage the 2 claws and install the power outlet socket cover.
2. INSTALL POWER OUTLET SOCKET ASSEMBLY
(a) Engage the claw and install the power outlet socket assembly.