Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1868018.png)
6. REMOVE DECK BOARD BRACKET See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
7. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Manual Seat)
(a) Remove the rear No. 2 seat assembly LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 2 Seat
Assembly (for Manual Seat Type LH Side)/Removal.
8. REMOVE REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat)
(a) Remove the rear No. 2 seat assembly LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear No. 2 Seat
Assembly (for Power Seat Type LH Side)/Removal.
9. REMOVE REAR SEAT CUSHION HINGE LOWER COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
10. REMOVE REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
11. REMOVE REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
12. REMOVE REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
13. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
14. REMOVE ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
15. REMOVE REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
16. REMOVE QUARTER TRIM PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
17. REMOVE QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal
18. REMOVE VOLTAGE INVERTER
(a) Disconnect the connector.
(b) Remove the 3 bolts and remove the voltage inverter.
Installation
POWER OUTLETS (INT): VOLTAGE INVERTER: INSTALLATION
1. INSTALL VOLTAGE INVERTER
(a) Install the voltage inverter with the 3 bolts.