Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Ignition Switch: Service and Repair
Removal
1UR-FE STARTING: IGNITION SWITCH: REMOVAL
1. CUSTOMIZE INFORMATION (for Power Tilt and Power Telescopic Steering Column) See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Removal and Replacement/Steering Column Assembly (for Power Tilt and Power Telescopic Steering
Column)/Removal
2. REMOVE LOWER STEERING COLUMN COVER See: Relays and Modules/Relays and Modules - Steering and Suspension/Relays and
Modules - Steering/Steering Column Control Module/Service and Repair/Removal
3. REMOVE IGNITION SWITCH ASSEMBLY
(a) Disconnect the ignition switch connector.
(b) Detach the 2 claws and remove the ignition switch.