Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Install a new gasket to the pressure feed tube.
(b) Install the pressure feed tube with the union bolt.
Torque : 51 Nm (520 kgf-cm, 38 ft-lbf)
3. CONNECT SOLENOID VALVE CONNECTOR
(a) Connect the solenoid valve connector.
4. CONNECT POWER STEERING OIL PRESSURE SENSOR CONNECTOR
(a) Connect the oil pressure sensor connector.
5. CONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE
(a) Connect the hose with the clip.
6. CONNECT HARNESS BRACKET