Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Install SST onto the power steering rack.
SST : 09631-20111
HINT
If necessary, scrape the burrs off the power steering rack teeth end and burnish.
(b) Coat SST with power steering fluid.
(c) Install the power steering rack into the rack housing.
(d) Remove SST.
4. INSTALL POWER STEERING RACK BUSH
(a) Using SST and a press, install a new rack bush oil seal onto the rack bush.
SST : 09950-60010
09951-00440
SST : 09950-70010
09951-07100
NOTICE:
Make sure that the rack bush oil seal is installed facing the correct direction.
(b) Coat a new O-ring with power steering fluid and install it onto the rack bush.
(c) To prevent the rack bush oil seal lip from being damaged, wind vinyl tape around the rack end and apply power steering fluid.