Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(a) Put matchmarks on the No. 1 rear suspension arm and adjust cam.
(b) Remove the 3 bolts and 3 nuts and remove the No. 1 rear suspension arm.
Installation
REAR SUSPENSION: REAR LOWER ARM (for No. 1 Arm): INSTALLATION
1. TEMPORARILY INSTALL NO. 1 REAR SUSPENSION ARM ASSEMBLY LH
(a) Align the matchmarks on the No. 1 rear suspension arm and adjust cam.
(b) Temporarily install the No. 1 rear suspension arm with the 3 bolts and 3 nuts.
2. INSTALL REAR SHOCK ABSORBER ASSEMBLY LH
See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Rear Shock Absorber/Installation
3. STABILIZE SUSPENSION See: Suspension Strut / Shock Absorber/Service and Repair/Removal and Replacement/Rear Shock
Absorber/Installation
4. TIGHTEN NO. 1 REAR SUSPENSION ARM ASSEMBLY LH