Sequoia 4WD V8-4.6L (1UR-FE) (2010)
6. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH
(a) Install the front axle hub See: Wheel Hub/Service and Repair/Removal and Replacement/Front Axle Hub/Installation.
7. CONNECT FRONT SPEED SENSOR LH
(a) Connect the front speed sensor to the steering knuckle with the bolt.
Torque : 11 Nm (107 kgf-cm, 8 ft-lbf)
(b) Attach the clip to the steering knuckle.
8. INSTALL FRONT WHEEL
*
for Aluminum Wheel
Torque : 131 Nm (1336 kgf-cm, 97 ft-lbf)
*
for Steel Wheel
Torque : 209 Nm (2131 kgf-cm, 154 ft-lbf)
9. CHECK SPEED SENSOR SIGNAL
(a) Check the speed sensor signal See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Initial
Inspection and Diagnostic Overview/Diagnosis System.
10. INSPECT SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
11. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
(a) Inspect and adjust the front wheel alignment See: Alignment/Service and Repair/Front Wheel Alignment.