Sequoia 4WD V8-4.6L (1UR-FE) (2010)
![background image](/toyota/sequoia_4wd/v8-4.6l_(1ur-fe)/Page-2129002.png)
3. INSTALL REAR AXLE ASSEMBLY
(a) Install the rear upper control arm with the bolt and nut.
(b) Align the matchmarks on the No. 1 rear suspension arm and adjust cam.
(c) Install the No. 1 rear suspension arm with the bolt and nut.
*
Bolt A
Torque : 250 Nm (2549 kgf-cm, 185 ft-lbf)
*
Bolt B
Torque : 185 Nm (1886 kgf-cm, 137 ft-lbf)
4. INSTALL NO. 2 REAR SUSPENSION ARM ASSEMBLY LH
(a) Install the No. 2 rear suspension arm to the rear axle with the nut.
Torque : 130 Nm (1326 kgf-cm, 96 ft-lbf)
(b) Install a new cotter pin.
5. INSTALL REAR AXLE SHAFT NUT LH
(a) Using a 39 mm socket wrench, install the rear axle shaft nut LH.
Torque : 340 Nm (3467 kgf-cm, 251 ft-lbf)