Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Suspension Control Module: Service and Repair
Installation
SUSPENSION CONTROL: SUSPENSION CONTROL ECU: INSTALLATION
1. INSTALL SUSPENSION CONTROL ECU
(a) Install the suspension control ECU with the bolt.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect the suspension control ECU connector.
2. INSTALL SUSPENSION CONTROL ECU (w/ AVS)
(a) Install the suspension control ECU with the 3 bolts.
Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)
(b) Connect the suspension control ECU connector.
3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
4. INSTALL REAR FLOOR MAT SUPPORT PLATE See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
5. INSTALL ROPE HOOK ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
7. INSTALL REAR DOOR SCUFF PLATE LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
8. INSTALL REAR FLOOR STEP NO. 2 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR FLOOR STEP NO. 1 COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation
11. INSTALL DECK BOARD BRACKET See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
12. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Installation