Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Removal
FRONT SUSPENSION: FRONT SHOCK ABSORBER: REMOVAL
1. REMOVE FRONT WHEEL
2. REMOVE ABSORBER CONTROL ACTUATOR (w/ AVS) See: Suspension Control ( Automatic - Electronic )/Damping Control
Actuator/Service and Repair/Removal
3. REMOVE SUSPENSION CONTROL BRACKET (w/ AVS)
(a) Remove the nut and the suspension control bracket.
4. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING LH
(a) Remove the nut from the shock absorber lower side.
NOTICE:
To prevent the shock absorber with coil spring from falling, leave the bolt inserted.