Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1478002.png)
Console Box/Removal.
2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Move the shift lever to N.
(b) Disconnect the transmission control cable end from the shift lever.
(c) Remove the clip and disconnect the transmission control cable from the shift lever retainer.
3. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
(a) Disconnect the clamp and 2 connectors.
(b) Remove the 4 bolts and transmission floor shift assembly.
Installation
A760F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: INSTALLATION
1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
(a) Install the transmission floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.