Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1479003.png)
7. REMOVE SHIFT LOCK CONTROL ECU
(a) Disconnect the shift lock solenoid connector.
(b) Disengage the 3 claws and remove the shift lock control ECU.
Reassembly
A760F AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY
1. INSTALL SHIFT LOCK CONTROL ECU
(a) Engage the 3 claws, and install the shift lock control ECU.
(b) Connect the shift lock solenoid connector.
2. INSTALL LOWER POSITION INDICATOR HOUSING
(a) Engage the 6 claws, and install the lower position indicator housing.