Sequoia 4WD V8-4.6L (1UR-FE) (2010)
10. REMOVE DIFFERENTIAL CASE ASSEMBLY
(a) Remove the differential case from the differential carrier.
11. REMOVE DIFFERENTIAL DRIVE PINION
(a) Set the differential carrier to an overhaul stand as shown in the illustration.
(b) Using a press, press out the drive pinion.
NOTICE:
Do not drop the drive pinion.
12. REMOVE FRONT DRIVE PINION FRONT RADIAL BALL BEARING
(a) Remove the bearing (inner race) from the differential carrier.
13. REMOVE FRONT DIFFERENTIAL BREATHER PLUG OIL DEFLECTOR
(a) Remove the 2 bolts and oil deflector.
14. REMOVE FRONT DIFFERENTIAL UNION
(a) Remove the front differential union from the differential carrier.
15. REMOVE FRONT DRIVE PINION REAR TAPERED ROLLER BEARING
(a) Using SST and a press, press out the bearing (inner race).