Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1513008.png)
(a) Check that the differential case is not damaged.
If the differential case is damaged, replace it.
24. REMOVE FRONT DIFFERENTIAL SIDE GEAR NEEDLE ROLLER BEARING
(a) Using a brass bar and hammer, tap out the 2 bearings.
25. REMOVE DIFFERENTIAL CLUTCH HUB
(a) Using a snap ring expander, remove the snap ring.
(b) Remove the differential clutch hub.
26. REMOVE DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL
(a) Using SST, tap out the oil seal.
SST : 09308-00010
27. REMOVE DIFFERENTIAL SIDE GEAR SHAFT SUB-ASSEMBLY RH
(a) Using a snap ring expander, remove the snap ring.
(b) Using a plastic-faced hammer, tap out the side gear shaft.