Sequoia 4WD V8-4.6L (1UR-FE) (2010)
/Page-1513036.png)
4. INSTALL REAR DIFFERENTIAL CASE BEARING
HINT
When replacing the 2 differential case bearings, fit the thinnest washer to each bearing. When reusing the bearings, fit a washer of the
same thickness as the one removed to each bearing.
(a) Install a new plate washer to the side bearing retainer.
(b) Using SST and a press, install the bearing (outer race) onto the differential case bearing retainer.
SST : 09950-70010
09951-07200
SST : 09951-01000
(c) Install a new plate washer onto the differential carrier.
(d) Using SST and a press, press in the bearing (outer race) onto the differential carrier assembly.
SST : 09950-70010
09951-07200
SST : 09951-01000
5. INSTALL REAR DRIVE PINION FRONT RADIAL BALL BEARING
(a) Using SST, install the bearing (outer race).