Sequoia 4WD V8-4.6L (1UR-FE) (2010)
SST : 09502-24010
SST : 09308-14010
9. TEMPORARILY INSTALL DIFFERENTIAL DRIVE PINION
(a) Install the differential drive pinion.
10. INSTALL REAR DIFFERENTIAL CASE SUB-ASSEMBLY
(a) Install the rear differential case sub-assembly.
11. INSTALL REAR DIFFERENTIAL SIDE BEARING RETAINER
(a) Install the rear differential side bearing retainer with the 12 bolts.
HINT
Tighten the bolts gradually, skipping to the bolt on the opposite side.
Torque : 70 Nm (714 kgf-cm, 52 ft-lbf)
12. INSTALL REAR DIFFERENTIAL CARRIER COVER BREATHER PLUG
(a) Install the rear differential carrier cover breather plug.