Sequoia 4WD V8-4.6L (1UR-FE) (2010)
SST : 09950-40011
09951-04010
09952-04010
09953-04020
09954-04010
09957-04010
09958-04011
SST : 09955-04100
SST : 09331-60010
NOTICE:
Pull out the spider bearing until the SST claws contact the universal joint sleeve yoke.
(k) Clamp the removed universal joint spider bearing in a vise.
(l) Using a brass bar and hammer, tap the universal joint sleeve yoke to remove the universal joint spider bearing.
HINT
Use the same removal procedure for the universal joint spider bearing on the opposite side.
(m)Remove the universal joint spider from the universal joint sleeve yoke.
Reassembly
DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY (for 4WD): REASSEMBLY
1. INSTALL REAR PROPELLER SHAFT UNIVERSAL JOINT SPIDER