Sequoia 4WD V8-4.6L (1UR-FE) (2010)
SST : 09521-24010
NOTICE:
Do not overtighten SST.
6. INSPECT AND ADJUST FRONT AXLE OUTBOARD JOINT BOOT SETTING CLAMP
(a) Using SST, inspect and adjust the clearance of the boot setting clamps.
SST : 09240-00020
Standard Clearance:
7. TEMPORARILY INSTALL FRONT DRIVE SHAFT INBOARD JOINT BOOT
(a) Wrap the spline of the outboard joint shaft with vinyl tape to prevent the boots from being damaged.
(b) Temporarily install the new inboard joint boot to the outboard joint shaft.
8. INSTALL FRONT DRIVE SHAFT INBOARD JOINT SHAFT ASSEMBLY
(a) Install the cage to the outboard joint shaft.
NOTICE:
Install the cage with its smaller inner diameter side facing the outboard joint.
(b) Align the matchmarks and install the inner race onto the outboard joint shaft.