Sequoia 4WD V8-4.6L (1UR-FE) (2010)
NOTICE:
Be careful not to damage the inner race.
(i) Remove the cage.
6. REMOVE REAR DRIVE SHAFT INBOARD JOINT BOOT
(a) Remove the inboard joint boot from the outboard joint shaft.
7. REMOVE REAR DRIVE SHAFT OUTBOARD JOINT BOOT CLAMP
(a) Using a side cutter, cut the outboard joint boot clamp and remove it.
8. REMOVE REAR DRIVE SHAFT NO. 2 OUTBOARD JOINT BOOT CLAMP
(a) Using a side cutter, cut the No. 2 outboard joint boot clamp and remove it.
9. REMOVE REAR DRIVE SHAFT OUTBOARD JOINT BOOT
(a) Remove the outboard joint boot from the outboard joint shaft.
10. REMOVE REAR DRIVE SHAFT DUST COVER
(a) Using SST and a press, press out the dust cover from the inboard joint shaft.
SST : 09950-00020
NOTICE:
Do not drop the inboard joint shaft.
11. REMOVE REAR DRIVE SHAFT DUST SEAL
(a) Using SST and a press, press out the dust seal from the outboard joint shaft assembly.
SST : 09950-00020