Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Power Window Switch: Testing and Inspection
Power Window Master Switch
WINDOW / GLASS: POWER WINDOW MASTER SWITCH: INSPECTION
1. INSPECT POWER WINDOW MASTER SWITCH
(a) Check the resistance.
(1) Measure the resistance according to the value(s) in the table below.
HINT
Window motors other than the driver MANUAL and rear seat window motors use LIN communication, and therefore this inspection
cannot be performed for those windows.
Standard Resistance:
(2) If the result is not as specified, replace the power window master switch.
Standard Resistance: