Sequoia 4WD V8-4.6L (1UR-FE) (2010)
*
Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and
regulator assembly onto the door See: Testing and Inspection/Programming and Relearning/Initialization.
(1) Apply battery voltage to the regulator motor and check the operation of the regulator motor.
OK:
(2) If the result is not as specified, replace the power window regulator motor.
3. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH
(a) Check the operation of the regulator motor.
(1) Apply battery voltage to the regulator motor and check the operation of the regulator motor.
OK:
(2) If the result is not as specified, replace the power window regulator motor.
4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH
(a) Check the operation of the regulator motor.