Sequoia 4WD V8-4.6L (1UR-FE) (2010)
glass when cutting off the adhesive.
*
To prevent the windshield glass from dropping when performing this operation, be sure to hold the windshield glass using suction
cups.
HINT
Depending on vehicles, a 1-piece or 2-piece type stopper is used.
(g) Using suction cups, remove the windshield glass.
NOTICE:
*
Be careful not to drop the windshield glass.
*
Leave as much adhesive on the vehicle body as possible when removing the windshield glass.
32. REMOVE WINDOW GLASS ADHESIVE DAM
(a) Using a scraper, remove the adhesive dam.
NOTICE:
*
Be careful not to damage the windshield glass.
*
Be sure to replace the adhesive dam with a new one.
33. REMOVE NO. 2 WINDSHIELD GLASS STOPPER
(a) Using a scraper, remove the 2 No. 2 stoppers.
NOTICE:
*
Be careful not to damage the windshield glass.
*
Be sure to replace the No. 2 stoppers with new ones.
34. REMOVE NO. 1 WINDSHIELD GLASS STOPPER (for 2-piece Type)
(a) Remove the 2 No. 1 stoppers.
NOTICE:
Be sure to replace the No. 1 stoppers with new ones.