Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
Required SSTs
VIN Write Procedure
To write a VIN to a replacement ECM (PCM), use the following process:
1.
Confirm the VIN. It is located on the front left of the instrument panel.
2.
Connect the Diagnostic Tester to DLC3.
3.
Turn the ignition switch and Diagnostic Tester switch ON.
4.
All vehicles except Prius and Highlander HV:
Select from the Diagnostic Tester menus: DIAGNOSIS, ENHANCED OBDII, VIN, and VIN WRITE.
Prius and Highlander HV vehicles:
Select from the Diagnostic Tester menus: DIAGNOSIS, OBD/MOBD, HV ECU, VIN, and VIN WRITE.