Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
b. Remove the cotter pin and lock cap.
c. While applying the brakes, remove the lock nut.
5. DISCONNECT FRONT SUSPENSION NO. 1 LOWER ARM
a. Remove the cotter pin and nut.
b. Using SST, disconnect the lower suspension arm from the lower ball joint.
SST 09628-62011
6. DISCONNECT FRONT DRIVE SHAFT
a. Using a plastic hammer, disengage the drive shaft from the axle hub.
b. Push the steering knuckle outward and disconnect the drive shaft from the steering knuckle.
NOTICE: Be careful not to damage the oil seal, boots and dust seal.
7. REMOVE FRONT SHOCK ABSORBER ASSEMBLY LH (for LH Side).