Sequoia 4WD V8-4.7L (2UZ-FE) (2006)
Windshield: Service and Repair
WINDSHIELD GLASS
REMOVAL
1. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP
2. REMOVE FRONT PILLAR GARNISH
a. Remove the assist grip.
1. Using a screwdriver, remove the 2 assist grip plugs.
HINT: Tape the screwdriver tip before use.
2. Remove the 2 screws and assist grip.
b. Remove the front pillar garnish.
c. Use the same manner described above to the other side.
3. REMOVE VISOR ASSEMBLY
4. REMOVE VISOR HOLDER
5. REMOVE ROOF CONSOLE BOX ASSEMBLY (w/ Sliding Roof)
a. Remove the 2 screws.
b. Using a screwdriver, remove the roof console box.
HINT: Tape the screwdriver tip before use.
c. Disconnect the connectors.
6. REMOVE ROOF CONSOLE BOX ASSEMBLY (w/o Sliding Roof)
a. Remove the 4 screws.
