Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-1610001.png)
Acceleration/Deceleration Sensor: Testing and Inspection
BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: YAW RATE AND DECELERATION SENSOR: INSPECTION
INSPECTION
1. CHECK YAW RATE SENSOR
(a) Check the yaw rate sensor. If any of the following occurs, replace the sensor with a new one:
-
The surface of the sensor is cracked, dented, or chipped.
-
The connector is scratched, cracked, or damaged.
-
The sensor has been dropped.
