Sequoia 4WD V8-5.7L (3UR-FE) (2009)
BRAKE (FRONT): FRONT BRAKE FLEXIBLE HOSE: REMOVAL
REMOVAL
1. REMOVE FRONT WHEEL
2. DRAIN BRAKE FLUID
NOTE: Wash off brake fluid immediately if it comes in contact with any painted surface.
3. REMOVE FRONT FLEXIBLE HOSE
(a) Remove the brake tube and wheel cylinder tube from the flexible hose with union nut wrench (10 mm) while holding the flexible hose with a
wrench.
NOTICE:
-
Do not bend or damage the brake tube and wheel cylinder tube.
-
Do not allow any foreign matter such as dirt and dust to enter the brake tube and wheel cylinder tube from the connecting points.
(b) Remove the 2 clips (labeled A) and flexible hose.
Installation
BRAKE (FRONT): FRONT BRAKE FLEXIBLE HOSE: INSTALLATION
INSTALLATION
1. INSTALL FRONT FLEXIBLE HOSE