Sequoia 4WD V8-5.7L (3UR-FE) (2009)
/Page-764001.png)
Camshaft Bearing: Specifications
CAMSHAFT HOUSING SUB-ASSEMBLY LH
Install the camshaft housing, and install the 18 bolts in the order shown in the illustration.
Bolt A
Torque.........................................................................................................................................................................................10 Nm (102 kgf-cm, 7 ft-lbf)
Except bolt A
Torque.......................................................................................................................................................................................30 Nm (306 kgf-cm, 22 ft-lbf)
Tighten the 10 bolts in the order shown in the illustration.
Torque.......................................................................................................................................................................................16 Nm (163 kgf-cm, 12 ft-lbf)
CAMSHAFT HOUSING SUB-ASSEMBLY RH
Install the camshaft housing, and install the 18 bolts in the order shown in the illustration.
Bolt A
Torque.........................................................................................................................................................................................10 Nm (102 kgf-cm, 7 ft-lbf)
Except bolt A
