Sequoia 4WD V8-5.7L (3UR-FE) (2009)
Air Bag Deactivation Switch: Service and Repair
Installation
SUPPLEMENTAL RESTRAINT SYSTEMS: CURTAIN SHIELD AIRBAG CUTOFF SWITCH: INSTALLATION
INSTALLATION
1. INSTALL CURTAIN AIRBAG CUTOFF SWITCH
(a) Engage the 2 claws to install the switch.
(b) Connect the connector.
2. INSTALL NO. 1 SWITCH HOLE BASE See: Body and Frame/Doors, Hood and Trunk/Trunk / Liftgate/Trunk / Liftgate Switch/Service and
Repair/Power Back Door Main Switch/Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
4. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System.